myspace hits counter

Paradox EVO Security Driver (Cinegration) - v 7.1.1

Enables Paradox EVO Security Panels to be controlled via Control4.  Fully integrates with Control4 to all the system to be set and monitored from the Control4 interfaces.

As well as the usual functions available a number of additional features have been added.

Zone Labels:  This feature grabs all the zone names from the Paradox panel and uses these for the description of the zones on the Connections tab.  This also creates a 'navigator last zone view'.  If a zone is violated then a 3 second zone description will be displayed under the security tab of Navigator.

User Name Events: All user codes are stored as user numbers.  This allows you to add programming to an event that is fired whenever that user enters their code either on the Security Keypad or Control4 panel.

Partitions:  Multi-partitions are supported and it is possible to to add programming whenever the state of any of the partitions changes.

Panel Programming Events:  Events can be set up within the Paradox programming that will trigger and event on the Control4 system.  So for example if a particular user disarms the system you could program the Paradox system to fire an event in Control4. 

Virtual Inputs:  As well as the physical sensor inputs to the Paradox system you can also define up to 16 virtual inputs from the Control4 system.  This can allow you to effectively use non-security sensors with the system.  As an example if a Control4 temperature sensor fell below a certain level you could make this provide a Freeze warning event to the Paradox system.

Paradox Security Systems are available worldwide - see http://www.paradox.com/Find_Distributor/ for your nearest distributor.


Supported manufacturer models

Supports Digiplex EVO48, EVO96, EVO192, DGP-848 (V4.11 onwards) and DGP-NE96 (V1.6 onwards) panels.


Supported Control4 operating systems

Compatible with Control4 OS 2.x and above ONLY


Control4 Processor Requirements

HC800                     
HC1000
HC250 can be used on smaller systems.  Please check Control4's recommended processor requirements for your specific project.


IMPORTANT -Paradox Security Driver Panel Compatibility

PRT3 Module is the module that this driver uses to control the security panel.  Paradox Security has a compatibility chart that will list whether this module is compatible with your security panel.  We have summarized this chart below for reference.

ONLY the following panels are compatible for two way control and feedback:
EVO192, EVO48, EVO96
Digiplex NE96 (V1.60 and up)
Digiplex 848 (4.11 and up)


Disclaimer

This driver is an independent commercial release by Extra Vegetables Ltd on behalf of Cinegration llc.  It is not authorized or supported by either Control4 or Paradox.  Extra Vegetables fully support the driver through its authorized dealer network.

Click to enlarge

 

Features

  • Integration with Digiplex EVO48, EVO96, EVO192, DGP-848 (V4.11 onwards) and DGP-NE96 (V1.6 onwards) panels
  • Full alarm control from Control4 interfaces
  • Zone Label Retrieval
  • User Name Events
  • Zone Status Events
  • Virtual Inputs from Control4