myspace hits counter

Channel Vision Legacy IP Camera - v 5.0.0

This is the legacy IP Camera driver for Channel Vision Technology IP Cameras and Webserver.  It is designed for use with older IP Cameras and Control4 Operating Systems prior to 2.5.3.  For Channel Vision's most recent SDDP cameras and Control4 OS 2.5.3 please use the drivers described here.

Both the 6521 dome and 6522 bullet cameras are supported. The W-1001 webserver enables any legacy analog video camera (or other composite video source) to be turned into an IP camera stream. We also have four drivers which can display the four video streams from the W-4001 4 channel IP camera server.

The cameras are supplied through your usual Channel Vision Technology supplier. We simply provide a driver.

If using the Webserver please make sure you are using the latest server firmware and the most recent versions of our drivers.  Distrorted images may be displayed if you are not using the latest versions of both.

For full details on the available cameras please visit the Channel Vision Technology website

Supported manufacturer models

Channel Vision 6521 dome camera
Channel Vision 6522 bullet camera
Channel Vision W-1001 camera server

Supported Control4 operating systems

Compatible with Control4 OS 2.2 and above ONLY

Control4 Processor Requirements

HC250 can be used on smaller systems.  Please check Control4's recommended processor requirements for your specific project.


This driver is an independent commercial release by Extra Vegetables Ltd.  It is not authorized or supported by Control4.  Extra Vegetables fully support the driver through its authorized dealer network.

Click to enlarge


  • Displays images from cameras on all Control4 interfaces. No more; no less.
  • Compatible with W-1001 and W-4001 camera servers.
  • The use of the cameras to record or other functions are not hindered by the driver.
  • Free to use on any Control4 project.
  • Installation instructions included.
  • Use Control4 OS 2.2 to show images on iPad and 4Sight.