myspace hits counter

Keene IPMSW - v 8.0.1

The Keene IP Power switch IPMSW is a two outlet mains switch that can be controlled over IP.  Not only does it have some great built in features our driver allows the outlets to be controlled and monitored directly by a Control4 system.

The driver and IPMSW switch combination allow you to automatically monitor and reboot a Control4 master controller.  This makes use of the switches internal timers.  You just indicate to the driver which outlet the master controller is connected to and it and the switch does the rest.  Then in the unlikely event of the master Control4 controller crashing the switch will automatically reboot it.  It couldn't be simpler!  See the video on the tab above to see how this works.

We also sell this driver in combination with our 'Ping' driver.  Then if you connect your router to an outlet on the switch you can monitor and automatically reboot the router if the connection to the internet is lost. The IPMSW comes with an IEC to regular socket lead in the box!

Of course you can just connect any equipment to the switch and simply provide manual or automatic control from Control4.  All from brands you know and trust.

More details from Keene Electronics.

Purchase the 'Monitor Suite' combination driver and save £5. 

Amazon UK Link:

Supported Control4 operating systems

Compatible with Control4 OS 2.x and above ONLY

Related products
'Ping' Driver

Control4 Processor Requirements

HC250 can be used on smaller systems.  Please check Control4's recommended processor requirements for your specific project.


If you use multiple units on a system each has to communicate on a unique port as well as IP address.  This is simple to set up both on the unit and the driver.

Further information

  • IP Control.
  • No IR bugs or serial ports required.
  • Full control of both outlets from Control4.
    Can monitor and reboot a Control4 master controller with NO PROGRAMMING.
  • Can monitor if an outlet is manually switched from the front of the unit.
  • Power Cycle commands in Custom Programming make it simple to 'switch it off and on again' without any complicated programming.


This driver is an independent commercial release by Extra Vegetables Ltd.  It is not authorized or supported either by Control4 or Keene.  Extra Vegetables fully support the driver through its authorized dealer network.

Click to enlarge

How to set up the driver to monitor and reboot the Control4 Master Controller




  • IP Control of either outlet
  • Monitor and auto reboot a Control4 master controller
  • Monitor manual switching from unit
  • Power cycle commands built into driver
  • Available in a bundle with our Ping driver